Siemens Sirene in Griechenland

Standorte, Fakten, Bilder von/über deutsche Sirenen im Ausland, heimischen Typen, etc. sowie unbekannte Sirenen
orestis
Harter Kern
Beiträge: 141
Registriert: Freitag 23. Dezember 2005, 11:45
Kontaktdaten:

Re: Siemens Sirene in Griechenland

Beitrag von orestis » Freitag 4. Januar 2008, 15:21

... Now, what is going on here...

This is the same SIEMENS siren shown in the first post of the topic, in Pallini. Two years later the roofs of the siren were taken away and they have covered the stator ports with some kind of cloth or tape ?!?

Why would someone do such a thing? (even if the siren is dead)

Tommorow I ll try to take closer pictures.
Dateianhänge
pallini.png

orestis
Harter Kern
Beiträge: 141
Registriert: Freitag 23. Dezember 2005, 11:45
Kontaktdaten:

Re: Siemens Sirene in Griechenland

Beitrag von orestis » Montag 7. Januar 2008, 16:03

OK, I went today at Pallini city hall and took some close up photos. It's obvious the siren is broken down.

I asked them if I could get it, they told me that's not easy at all, I must contact several people and maybe several state services... But I think is worth it.

I didn't know that it's rotor is so similar to the E57's

Anyway, it's an old WWII siren and I 'll do everything to rescue it, but I will need luck!
Dateianhänge
L135D.jpg
L135C.jpg
L135A.jpg
L135B.jpg

orestis
Harter Kern
Beiträge: 141
Registriert: Freitag 23. Dezember 2005, 11:45
Kontaktdaten:

Re: Siemens Sirene in Griechenland

Beitrag von orestis » Donnerstag 10. Januar 2008, 10:45

Die L135 ist meine!

Now, correct me if wrong, the siren's weight is approx. 100 kg?? Any ideas on how I am going to bring it down?

thx!
Zuletzt geändert von orestis am Donnerstag 10. Januar 2008, 10:47, insgesamt 1-mal geändert.

Benutzeravatar
Niklas
IG-WaSi Team
Beiträge: 1696
Registriert: Samstag 27. März 2004, 21:58
Wohnort: Frankfurt am Main

Re: Siemens Sirene in Griechenland

Beitrag von Niklas » Donnerstag 10. Januar 2008, 12:07

Congratulations!
And yes this siren weights about 100kg but don't worry. It's a flat roof. Just take your time, a can of WD-40 and disassemble the old lady.
242

Wolfi
Harter Kern
Beiträge: 299
Registriert: Dienstag 17. August 2004, 23:10
Wohnort: Friedrichsdorf im Taunus

Re: Siemens Sirene in Griechenland

Beitrag von Wolfi » Donnerstag 10. Januar 2008, 12:26

Congrats, Orestis !

That's a heavy weight, indeed.

Disassembling is one possibility, but what about
a pulley winch?

For example, look at this:

www.conrad.de and enter article nr. 812442 - 62

A pulley (in german called "Flaschenzug") with an
transmission rate of 4:1 and a load capacity of 200 kg.
You can pull a load of 200 kg with a force of 50 kg.
Or - 100 kg with 25 kg of force ...

I think you can ask also in stores for tools or
car accessories for such an useful tool.

Length of the rope must correspond with the height
of the building, of course. And, you must find a
stable point for fixing the pulley, rugged enough
for carrying the full load of abt. 100 kg.

Good luck !

Wolfi
Zuletzt geändert von Wolfi am Donnerstag 10. Januar 2008, 12:40, insgesamt 1-mal geändert.

orestis
Harter Kern
Beiträge: 141
Registriert: Freitag 23. Dezember 2005, 11:45
Kontaktdaten:

Re: Siemens Sirene in Griechenland

Beitrag von orestis » Donnerstag 10. Januar 2008, 13:10

Unbelievable. They told me "come n' get it" and when I went there, was another person and said "the siren isn't going nowhere!" He explained that the others didn't know that the siren is going to be repaired, and he was the one that is in charge for the siren maintenance!
( ... )
I told him the siren is old etc and he answered "no the siren is quite new and fabricated in the USA " (no comments)

...It was too easy to be true. I was about to call a crane to load the siren in my car... (as they suggested this morning!)

I only hope the siren won't be scrapped.

Anyway, thx for helping!
Zuletzt geändert von orestis am Donnerstag 10. Januar 2008, 13:20, insgesamt 1-mal geändert.

orestis
Harter Kern
Beiträge: 141
Registriert: Freitag 23. Dezember 2005, 11:45
Kontaktdaten:

Re: Siemens Sirene in Griechenland

Beitrag von orestis » Samstag 30. Juni 2018, 18:08

Update: the old Siemens siren has been saved fortunately (after 10 years!) and totally refurbished and rewound. It has a new home now, on a school a few km away from its old location. An adventure with happy end for a great siren.


Greets from Athens!
Dateianhänge
pallini-siemens.jpg

Benutzeravatar
sirenator
Sirenenexperte
Beiträge: 1682
Registriert: Freitag 22. Mai 2009, 10:49
Wohnort: Nörvenich
Kontaktdaten:

Re: Siemens Sirene in Griechenland

Beitrag von sirenator » Samstag 30. Juni 2018, 19:56

Hey orestis! Nice that you are still around! :-)
And it's verry nice that the old lady got a second live.

Antworten

Wer ist online?

Mitglieder in diesem Forum: Google [Bot] und 0 Gäste